Ascendo The 10 Passive On-Wall
Ascendo · Speaker · On-wall · 2024
- L3 · Verified
- Measured directivity
Open in the designer Add to compare Opens the designer's starter room with the Ascendo The 10 Passive On-Wall on the left, centre and right channels. It replaces the design open in this browser once you edit it, as a shared link does.
Specifications
| Property | Value | Source |
|---|---|---|
| Sensitivity | 94.5 dB/2.83V/m voltage: 2.83V · distance: 1m · baffle loading: 2pi (half-space) · unit: dB/2.83V/m | Sensitivity: Independent measurement, Klippel NFS Independent measurement, Klippel NFS, Document ↗ |
| Impedance, nominal | Not stated The record carries no nominal impedance. | — |
| Impedance, minimum | Not stated The record carries no minimum impedance. | — |
| Maximum SPL | Not stated Klippel report on file; the value is a plot image and needs the vision extraction pass | — |
| LF extension | Not stated Klippel report on file; the value is a plot image and needs the vision extraction pass | — |
| Coverage, H × V | 80° × 80° tolerance: unstated · frequency: unstated | Coverage, H × V: Manufacturer, Ascendo product page Manufacturer, Ascendo product page Document ↗ |
Measured directivity
Measured horizontal and vertical directivity is on file for this model. The Cinema Designer's reflections engine uses it in place of the coverage-angle model.
- Source type
- Independent measurementDirectivity: Independent measurement, Klippel NFS measurement report
- Source
- Klippel NFS measurement report, Contralto Audio
- Confidence
- high
- Note
- Read 2026-09-26 from the vector paths of the SPL Horizontal / SPL Vertical pages (openavdb extraction script). Per-plane distance, smoothing and reference voltage are in the data file.
Horizontal off-axis response
- Extracted from a published plot
- 0°
- 20°
- 40°
- 60°
- 90°
Plotted values
| Hz | 0° | 20° | 40° | 60° | 90° |
|---|---|---|---|---|---|
| 20 | — | — | — | — | — |
| 25 | 0 | -0.14 | 0.03 | 0.13 | 0.23 |
| 31.5 | 0 | -0.25 | -0.24 | -0.21 | -0.2 |
| 40 | 0 | -0.28 | -0.3 | -0.32 | -0.33 |
| 50 | 0 | -0.22 | -0.24 | -0.26 | -0.26 |
| 63 | 0 | -0.14 | -0.14 | -0.16 | -0.16 |
| 80 | 0 | -0.14 | -0.15 | -0.17 | -0.17 |
| 100 | 0 | -0.13 | -0.14 | -0.17 | -0.18 |
| 125 | 0 | -0.13 | -0.18 | -0.18 | -0.22 |
| 160 | 0 | -0.08 | -0.13 | -0.16 | -0.19 |
| 200 | 0 | -0.12 | -0.17 | -0.23 | -0.27 |
| 250 | 0 | -0.11 | -0.19 | -0.29 | -0.36 |
| 315 | 0 | -0.16 | -0.34 | -0.5 | -0.63 |
| 400 | 0 | -0.13 | -0.34 | -0.56 | -0.72 |
| 500 | 0 | -0.3 | -0.82 | -1.32 | -1.67 |
| 630 | 0 | -0.41 | -1.1 | -1.88 | -2.44 |
| 800 | 0 | -0.8 | -2.17 | -3.57 | -4.55 |
| 1000 | 0 | -0.61 | -1.82 | -3.06 | -3.9 |
| 1250 | 0 | -0.71 | -2.57 | -4.92 | -6.91 |
| 1600 | 0 | -0.98 | -4.04 | -7.86 | -10.46 |
| 2000 | 0 | -1.95 | -5.7 | -9.2 | -11.11 |
| 2500 | 0 | -1.9 | -5.15 | -8.97 | -11.39 |
| 3150 | 0 | -1.21 | -5.99 | -9.53 | -11.61 |
| 4000 | 0 | -1.02 | -4.41 | -8.73 | -11.07 |
| 5000 | 0 | -0.52 | -2.19 | -7.29 | -10.56 |
| 6300 | 0 | 2.45 | 0.87 | -5.64 | -10.11 |
| 8000 | 0 | -0.09 | -5.35 | -16.15 | -20.84 |
| 10000 | 0 | -1.88 | -9.34 | -15.85 | -20.22 |
| 12500 | 0 | -5.62 | -12.9 | -18.43 | -27.68 |
| 16000 | 0 | -10.06 | -14.17 | -25.88 | -26.03 |
| 20000 | 0 | -11.27 | -19.78 | -25.73 | -27.56 |
Vertical off-axis response
- Extracted from a published plot
- 0°
- 20°
- 40°
- 60°
- 90°
Plotted values
| Hz | 0° | 20° | 40° | 60° | 90° |
|---|---|---|---|---|---|
| 20 | — | — | — | — | — |
| 25 | 0 | 1.71 | 3.7 | 5.14 | 6.01 |
| 31.5 | 0 | 0.95 | 2.38 | 3.53 | 4.23 |
| 40 | 0 | 0.5 | 1.39 | 2.12 | 2.61 |
| 50 | 0 | 0.27 | 0.82 | 1.3 | 1.61 |
| 63 | 0 | 0.12 | 0.45 | 0.72 | 0.91 |
| 80 | 0 | -0.03 | 0.1 | 0.19 | 0.26 |
| 100 | 0 | -0.08 | -0.04 | -0.01 | 0 |
| 125 | 0 | -0.13 | -0.14 | -0.2 | -0.26 |
| 160 | 0 | -0.12 | -0.23 | -0.36 | -0.47 |
| 200 | 0 | -0.16 | -0.32 | -0.49 | -0.62 |
| 250 | 0 | -0.16 | -0.36 | -0.58 | -0.72 |
| 315 | 0 | -0.42 | -0.91 | -1.34 | -1.63 |
| 400 | 0 | -0.52 | -1.25 | -1.99 | -2.49 |
| 500 | 0 | -0.51 | -1.41 | -2.36 | -3.03 |
| 630 | 0 | -0.28 | -1.45 | -3.04 | -4.36 |
| 800 | 0 | 0.32 | -0.2 | -1.32 | -2.4 |
| 1000 | 0 | -0.2 | -0.95 | -2.06 | -3.17 |
| 1250 | 0 | -0.64 | -1.64 | -3.3 | -5.19 |
| 1600 | 0 | -2.09 | -6.19 | -9.14 | -10.26 |
| 2000 | 0 | -0.62 | -4.23 | -9.3 | -11.56 |
| 2500 | 0 | -1.2 | -4.51 | -10.06 | -12.48 |
| 3150 | 0 | -1.8 | -4.44 | -10.06 | -12.7 |
| 4000 | 0 | -1.79 | -4.47 | -8.2 | -12.09 |
| 5000 | 0 | -0.36 | -2.32 | -7.81 | -12.51 |
| 6300 | 0 | 2.37 | 0.37 | -4.83 | -11.67 |
| 8000 | 0 | -0.33 | -5.81 | -13.26 | -21.19 |
| 10000 | 0 | -1.66 | -9.65 | -15.17 | -22.19 |
| 12500 | 0 | -3.56 | -12.71 | -18.17 | -26.52 |
| 16000 | 0 | -7.11 | -12.2 | -26.18 | -30.48 |
| 20000 | 0 | -11.53 | -22.2 | -25.3 | -36.16 |