Ascendo The 15 Be Pro Passive On-Wall
Ascendo · Speaker · On-wall
- L3 · Verified
- Measured directivity
Open in the designer Add to compare Opens the designer's starter room with the Ascendo The 15 Be Pro Passive On-Wall on the left, centre and right channels. It replaces the design open in this browser once you edit it, as a shared link does.
Specifications
| Property | Value | Source |
|---|---|---|
| Sensitivity | 95.3 dB/2.83V/m voltage: 2.83V · distance: 1m · loading: unstated · unit: dB/2.83V/m | Sensitivity: Independent measurement, Klippel NFS measurement report Independent measurement, Klippel NFS measurement report, Document ↗ |
| Impedance, nominal | 8 Ω | Impedance, nominal: Not stated in the record Not stated in the record |
| Impedance, minimum | Not stated The record carries no minimum impedance. | — |
| Maximum SPL | 125 dB (continuous) loading: half_space · basis: continuous | Maximum SPL: Manufacturer, Ascendo THE15 BE PRO P OW technical data Manufacturer, Ascendo THE15 BE PRO P OW technical data, Document ↗ |
| LF extension | 70 Hz (-3dB) tolerance: -3dB | LF extension: Manufacturer, Ascendo THE15 BE PRO P OW technical data Manufacturer, Ascendo THE15 BE PRO P OW technical data, Document ↗ |
| Coverage, H × V | 85° × 85° tolerance: unstated · frequency: unstated | Coverage, H × V: Manufacturer, Ascendo THE15 BE PRO P OW technical data Manufacturer, Ascendo THE15 BE PRO P OW technical data, Document ↗ |
Measured directivity
Measured horizontal and vertical directivity is on file for this model. The Cinema Designer's reflections engine uses it in place of the coverage-angle model.
- Source type
- Independent measurementDirectivity: Independent measurement, Klippel NFS measurement report
- Source
- Klippel NFS measurement report, Contralto Audio
- Confidence
- high
- Note
- Read 2026-09-26 from the vector paths of the SPL Horizontal / SPL Vertical pages (openavdb extraction script).
Horizontal off-axis response
- Extracted from a published plot
- 0°
- 20°
- 40°
- 60°
- 90°
Plotted values
| Hz | 0° | 20° | 40° | 60° | 90° |
|---|---|---|---|---|---|
| 20 | 0 | — | 2.33 | 3.93 | 4.8 |
| 25 | 0 | 0.42 | 1.37 | 2.03 | 2.42 |
| 31.5 | 0 | 0.18 | 0.55 | 0.83 | 1.02 |
| 40 | 0 | 0.11 | 0.32 | 0.48 | 0.57 |
| 50 | 0 | 0.03 | 0.14 | 0.24 | 0.29 |
| 63 | 0 | 0 | 0.06 | 0.11 | 0.15 |
| 80 | 0 | -0.03 | 0.01 | 0.05 | 0.06 |
| 100 | 0 | -0.06 | -0.03 | -0.02 | -0.02 |
| 125 | 0 | 0 | 0.03 | 0.03 | 0.02 |
| 160 | 0 | 0.11 | 0.16 | 0.19 | 0.18 |
| 200 | 0 | -0.02 | -0.09 | -0.16 | -0.21 |
| 250 | 0 | -0.13 | -0.46 | -0.84 | -1.11 |
| 315 | 0 | 0.05 | -0.21 | -0.6 | -0.88 |
| 400 | 0 | -0.03 | -0.35 | -0.78 | -1.1 |
| 500 | 0 | -0.18 | -0.8 | -1.68 | -2.36 |
| 630 | 0 | -0.86 | -2.46 | -4.43 | -6.02 |
| 800 | 0 | -0.92 | -2.74 | -5 | -6.77 |
| 1000 | 0 | -1.08 | -3.67 | -7.12 | -10.13 |
| 1250 | 0 | -1.91 | -6.15 | -11.19 | -14.54 |
| 1600 | 0 | -1.45 | -4.93 | -8.68 | -11.25 |
| 2000 | 0 | -1.14 | -4.39 | -8.32 | -11.88 |
| 2500 | 0 | -1.35 | -4.77 | -9.59 | -13.33 |
| 3150 | 0 | -1.73 | -6.6 | -11.69 | -14.92 |
| 4000 | 0 | -1.15 | -4.85 | -10.04 | -13.33 |
| 5000 | 0 | -0.68 | -4.14 | -10.13 | -13.76 |
| 6300 | 0 | -1.4 | -4.56 | -11.33 | -16.02 |
| 8000 | 0 | -0.52 | -6.25 | -15.86 | -19.39 |
| 10000 | 0 | -0.81 | -8.35 | -18.41 | -21.86 |
| 12500 | 0 | -3.15 | -10.27 | -23.01 | -24.1 |
| 16000 | 0 | -7.37 | -17.16 | -24.12 | -26.2 |
| 20000 | 0 | -12.67 | -15.26 | -22.87 | -28.77 |
Vertical off-axis response
- Extracted from a published plot
- 0°
- 20°
- 40°
- 60°
- 90°
Plotted values
| Hz | 0° | 20° | 40° | 60° | 90° |
|---|---|---|---|---|---|
| 20 | 0 | 6.67 | 11.19 | 14.06 | 15.7 |
| 25 | 0 | 3.83 | 7.25 | 9.68 | 11.15 |
| 31.5 | 0 | 1.84 | 4.05 | 5.87 | 7.04 |
| 40 | 0 | 1.12 | 2.5 | 3.77 | 4.62 |
| 50 | 0 | 0.65 | 1.51 | 2.27 | 2.8 |
| 63 | 0 | 0.36 | 0.81 | 1.19 | 1.45 |
| 80 | 0 | 0.17 | 0.33 | 0.4 | 0.41 |
| 100 | 0 | 0.08 | 0.08 | -0.05 | -0.2 |
| 125 | 0 | 0.05 | -0.1 | -0.45 | -0.8 |
| 160 | 0 | 0.34 | 0.27 | -0.14 | -0.6 |
| 200 | 0 | 0.46 | 0.63 | 0.51 | 0.27 |
| 250 | 0 | 0.02 | -0.55 | -1.39 | -2.01 |
| 315 | 0 | 0.26 | -0.4 | -1.58 | -2.54 |
| 400 | 0 | 0.35 | -0.3 | -1.76 | -2.93 |
| 500 | 0 | 0.57 | 0.5 | -1.29 | -3.05 |
| 630 | 0 | -0.84 | -1.26 | -3.68 | -6.23 |
| 800 | 0 | -1.65 | -2.14 | -4.26 | -8.31 |
| 1000 | 0 | -0.19 | -4.46 | -5.85 | -10.53 |
| 1250 | 0 | -1.81 | -5.94 | -11.49 | -13.94 |
| 1600 | 0 | -1.3 | -4.77 | -8.47 | -10.91 |
| 2000 | 0 | -1.12 | -4.15 | -7.54 | -12.01 |
| 2500 | 0 | -1.18 | -4.55 | -9.14 | -13.8 |
| 3150 | 0 | -1.63 | -6.77 | -11.95 | -16.4 |
| 4000 | 0 | -0.74 | -4.85 | -9.48 | -14.6 |
| 5000 | 0 | -0.63 | -4.68 | -10.11 | -15.06 |
| 6300 | 0 | -1.38 | -4.79 | -11.68 | -17.99 |
| 8000 | 0 | -0.27 | -6.32 | -15.89 | -19.61 |
| 10000 | 0 | -0.72 | -8.36 | -18.48 | -22.85 |
| 12500 | 0 | -3.29 | -11.88 | -23.65 | -28.45 |
| 16000 | 0 | -7.95 | -18.09 | -24.57 | -31.89 |
| 20000 | 0 | -10.29 | -17.86 | -25.35 | -34.62 |