Ascendo The 6 Passive Wedge 30
Ascendo · Speaker · Wedge · 2023
- L4 · Reference
- Measured directivity
Open in the designer Add to compare Opens the designer's starter room with the Ascendo The 6 Passive Wedge 30 on the left, centre and right channels. It replaces the design open in this browser once you edit it, as a shared link does.
Specifications
| Property | Value | Source |
|---|---|---|
| Sensitivity | 93 dB/2.83V/m voltage: 2.83V · distance: 1m · loading: unstated · unit: dB/2.83V/m | Sensitivity: Independent measurement, Klippel NFS Independent measurement, Klippel NFS, Document ↗ |
| Impedance, nominal | 8 Ω | Impedance, nominal: Not stated in the record Not stated in the record |
| Impedance, minimum | Not stated The record carries no minimum impedance. | — |
| Maximum SPL | 112 dB (continuous) loading: unstated · basis: continuous | Maximum SPL: Independent measurement, Klippel NFS MTON test Independent measurement, Klippel NFS MTON test, Document ↗ |
| LF extension | 80 Hz (-10dB) tolerance: -10dB | LF extension: Independent measurement, Klippel NFS Independent measurement, Klippel NFS Document ↗ |
| Coverage, H × V | 85° × 85° tolerance: unstated · frequency: unstated | Coverage, H × V: Manufacturer, Ascendo product page Manufacturer, Ascendo product page Document ↗ |
Measured directivity
Measured horizontal directivity is on file for this model. The vertical plane is not measured: it is assumed equal to the horizontal plane. The Cinema Designer's reflections engine uses it in place of the coverage-angle model.
- Source type
- Independent measurementDirectivity: Independent measurement, Klippel NFS measurement report
- Source
- Klippel NFS measurement report, Contralto Audio
- Confidence
- high
- Note
- Read 2026-09-26 from the vector paths of the SPL Horizontal / SPL Vertical pages (openavdb extraction script). Per-plane distance, smoothing and reference voltage are in the data file.
- Vertical plane
- Assumed from horizontal, not measured; the plot caption gives the reason.
Horizontal off-axis response
- Extracted from a published plot
- 0°
- 20°
- 40°
- 60°
- 90°
Plotted values
| Hz | 0° | 20° | 40° | 60° | 90° |
|---|---|---|---|---|---|
| 20 | — | — | — | — | — |
| 25 | — | — | — | — | — |
| 31.5 | 0 | -0.4 | -0.4 | -0.45 | -0.45 |
| 40 | 0 | -0.32 | -0.37 | -0.41 | -0.41 |
| 50 | 0 | -0.27 | -0.28 | -0.29 | -0.3 |
| 63 | 0 | -0.2 | -0.22 | -0.23 | -0.24 |
| 80 | 0 | -0.16 | -0.16 | -0.16 | -0.16 |
| 100 | 0 | -0.15 | -0.2 | -0.2 | -0.21 |
| 125 | 0 | -0.13 | -0.16 | -0.2 | -0.2 |
| 160 | 0 | -0.1 | -0.14 | -0.15 | -0.18 |
| 200 | 0 | -0.1 | -0.18 | -0.23 | -0.26 |
| 250 | 0 | -0.11 | -0.18 | -0.25 | -0.28 |
| 315 | 0 | -0.08 | -0.16 | -0.23 | -0.28 |
| 400 | 0 | -0.11 | -0.18 | -0.24 | -0.29 |
| 500 | 0 | -0.16 | -0.43 | -0.66 | -0.78 |
| 630 | 0 | -0.15 | -0.4 | -0.67 | -0.84 |
| 800 | 0 | -0.18 | -0.52 | -0.95 | -1.29 |
| 1000 | 0 | 0.09 | -0.36 | -0.98 | -1.42 |
| 1250 | 0 | -0.68 | -1.39 | -2.24 | -2.74 |
| 1600 | 0 | -0.95 | -2.24 | -3.54 | -4.17 |
| 2000 | 0 | -1.54 | -4.38 | -6.88 | -8.32 |
| 2500 | 0 | -1.28 | -4.37 | -8.05 | -10.27 |
| 3150 | 0 | -0.92 | -4.41 | -8.37 | -10.27 |
| 4000 | 0 | -1.32 | -4.97 | -8.92 | -10.38 |
| 5000 | 0 | -2.27 | -5.57 | -8.98 | -10.2 |
| 6300 | 0 | -2.85 | -4.41 | -7.57 | -9.41 |
| 8000 | 0 | 1.67 | 0.14 | -2.31 | -5.89 |
| 10000 | 0 | 2.99 | 2.29 | -2.89 | -9.92 |
| 12500 | 0 | -1.06 | -4.58 | -14.95 | -23.66 |
| 16000 | 0 | 1.32 | -8.25 | -14.84 | -19.38 |
| 20000 | 0 | -7.54 | -12.38 | -13.9 | -28.09 |
Vertical off-axis response
- Assumed from horizontal
- 0°
- 20°
- 40°
- 60°
- 90°
Plotted values
| Hz | 0° | 20° | 40° | 60° | 90° |
|---|---|---|---|---|---|
| 20 | — | — | — | — | — |
| 25 | — | — | — | — | — |
| 31.5 | 0 | -0.4 | -0.4 | -0.45 | -0.45 |
| 40 | 0 | -0.32 | -0.37 | -0.41 | -0.41 |
| 50 | 0 | -0.27 | -0.28 | -0.29 | -0.3 |
| 63 | 0 | -0.2 | -0.22 | -0.23 | -0.24 |
| 80 | 0 | -0.16 | -0.16 | -0.16 | -0.16 |
| 100 | 0 | -0.15 | -0.2 | -0.2 | -0.21 |
| 125 | 0 | -0.13 | -0.16 | -0.2 | -0.2 |
| 160 | 0 | -0.1 | -0.14 | -0.15 | -0.18 |
| 200 | 0 | -0.1 | -0.18 | -0.23 | -0.26 |
| 250 | 0 | -0.11 | -0.18 | -0.25 | -0.28 |
| 315 | 0 | -0.08 | -0.16 | -0.23 | -0.28 |
| 400 | 0 | -0.11 | -0.18 | -0.24 | -0.29 |
| 500 | 0 | -0.16 | -0.43 | -0.66 | -0.78 |
| 630 | 0 | -0.15 | -0.4 | -0.67 | -0.84 |
| 800 | 0 | -0.18 | -0.52 | -0.95 | -1.29 |
| 1000 | 0 | 0.09 | -0.36 | -0.98 | -1.42 |
| 1250 | 0 | -0.68 | -1.39 | -2.24 | -2.74 |
| 1600 | 0 | -0.95 | -2.24 | -3.54 | -4.17 |
| 2000 | 0 | -1.54 | -4.38 | -6.88 | -8.32 |
| 2500 | 0 | -1.28 | -4.37 | -8.05 | -10.27 |
| 3150 | 0 | -0.92 | -4.41 | -8.37 | -10.27 |
| 4000 | 0 | -1.32 | -4.97 | -8.92 | -10.38 |
| 5000 | 0 | -2.27 | -5.57 | -8.98 | -10.2 |
| 6300 | 0 | -2.85 | -4.41 | -7.57 | -9.41 |
| 8000 | 0 | 1.67 | 0.14 | -2.31 | -5.89 |
| 10000 | 0 | 2.99 | 2.29 | -2.89 | -9.92 |
| 12500 | 0 | -1.06 | -4.58 | -14.95 | -23.66 |
| 16000 | 0 | 1.32 | -8.25 | -14.84 | -19.38 |
| 20000 | 0 | -7.54 | -12.38 | -13.9 | -28.09 |